How Can We Help?
To install the Pinlock® Tear-Off pins, place the inner part of the pin on the inside of the visor. Then place the Tear-Off button on the outside of the visor, on top of the other side of the pin. Tighten the pins on the visor with the screw by using a PH1 screwdriver and 5 mm Hexagon. When installing a new Pinlock® lens, make sure that the indicator (little arrow) of the pin is facing outwards.
Please remove the Pinlock® lens before adjusting the Pinlock® Tear-Off pins.
Adjust the pin by turning them from the outside using a small screwdriver. Increase the tension on the lens by turning the indicator more inwards.
When the silicone bead of the Pinlock® lens makes a full seal all around the lens and the visor, the adjustment is complete. Does your lens not make a full seal with your pins at maximum tension? Feel free to contact us at firstname.lastname@example.org.